Email extsw@yahoo.com or Call Us (530) 712-6623
Cart 0
1" ID stainless spacer

extsw.com

extsw 1.000" ID x 1 1/2" OD x 1/2" thick 304 Stainless Spacers

$9.70

Customer Reviews

Based on 1 review Write a review

extsw 1.000” ID x 1 1/2” OD x 1/2” Thick 304 alloy Stainless Spacers

Actual size 1.000 ID x 1.490 OD x .500 thick 
(+/-.002 on ID) (+/- .003 on all dimensions)

.030 inch Radius OD / Countersunk ID (no sharp edges)

Made in USA on a CNC lathe

It is a beautiful fit for your (1” Stainless shafts .997 and below), All-thread, fully threaded bolts.

(These are a very tight fit on a .997" diameter shaft)

If want an easier fit use our 1.008" ID shaft spacers

(Not for bolts with shanks)


Just contact me if you need a custom size washer.

"18-8" is not an specific alloy

"Stainless steel" is not a specific alloy

WE TELL YOU THE ALLOY OF STAINLESS

"18-8" is not the same as 304 Alloy.

"18-8" is a general classification of the 300 series Stainless steel, which includes 302, 302HQ, 303, 304, 305, 384, XM7 .

304 Stainless Alloy is more expensive and is harder to machine than 303. 

304 has better corrosion resistance than 303. 304 is weldable, 303 is not.

The term "18-8" has APPROXIMATELY (not exactly) 18% Chromium and 8% Nickel. 

The term "304" alloy stainless steel has a MINIMUM amount of 18% Chromium and a MINIMUM amount of 8% Nickel, COMBINED with a MAXIMUM of 0.08% Carbon. Carbon is one of the elements that will make it corrode.

Sulfur is added to the 303 alloy which makes it easier to machine, but the sulfur addition does lower Alloy 303’s corrosion resistance to below that of Alloy 304 and also makes it not suitable for welding.

Customer Reviews

Based on 1 review Write a review

Share this Product


More from this collection